parvez mobile repairing solution: 2013

1.READ INFO:

Description :- Read info use full for read mobile information’s. This will tell you complete details of your phone such as Mobile Flash ic, Mobile Cpu ( which MTK Cpu inside ), Mobile Flash size etc

Read info is use full when you got dead phone for flash or when you got any new working phone you can read info of it and if it's new flash then you can read flash file for future use.

------------------------------------------------------------------------------------------------------------------------------------------

How can i use read info function ?

Click on read info,

Click on Auto Detect Pin out,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Press and hold power button of phone,

click on Run button,

It will show you like this

Detection initiated, connect the phone and power on it...

Vcc: null

Gnd: 20

Analyzing Rx and Tx...

MT6250/6252, RX: 22, TX: 21

Setting...

Pinouts setting complete!

Connecting...

Hardware version:D000

Software version:0101

CPU TYPE:6252

Internal version:8B00

Boot downloading complete!

Flash ID: 00C20025

Flash Type: SF_MX25U6435E

Chip Capacity: 0x800000(8MB)

Mobile phone software version for:23_V11

Baud adjust...complete.

>>Read phone information success.

As you can see

CPU TYPE:6252

This is information of your cpu

Flash ID: 00C20025

This is information of your Flash id inside your mobile

Flash Type: SF_MX25U6435E

This is information of your Flash Type inside your mobile

Chip Capacity: 0x800000(8MB)

This is information of your Mobile Flash ic Size

Mobile phone software version for: 23_V11

This is information of your mobile Firmware inside

-------------------------------------------------------------------------------------------------------------------------------------------------------

2.READ FLASH

Read flash is use full when you got same dead phone for flash then you can write readed flash file for revive faulty phone .

readed flash file is need for further operation’s

it's good habit to read flash file for every phone before doing any other operation, it will help you to reback your phone working when something goes wrong in other operation’s

-------------------------------------------------------------------------------

Tips:-press power button till boot download complete

Click on run

----------------------------------------------------------------------------

How can i use read Flash function ?

Click on read flash,

Click on Auto Detect Pinout,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Press and hold power button of phone,

click on Run button,

after reading finish it will ask you to path for saving readed file

It will show you like this:-

Connecting...

Hardware version:D000

Software version:0101

CPU TYPE:6252

Internal version:8B00

Boot downloading complete!

Flash ID: 00C20025

Flash Type: SF_MX25U6435E

Chip Capacity: 0x800000(8MB)

Mobile phone software version for:23_V11

Baud adjust...complete.

Flash reading complete!

usercode:1234

usercode:7634

>>The data has been saved in C:\Users\reetesh\Desktop\LEATEK52_6432_10A_PCB01_GPRS_MT6252_S01.23_V11.BIN, size: 8 M.

in this log as you can see :

CPU TYPE:6252

This is information of your cpu

Flash ID: 00C20025

This is information of your Flash id inside your mobile

Flash Type: SF_MX25U6435E

This is information of your Flash Type inside your mobile

Chip Capacity: 0x800000(8MB)

This is information of your Mobile Flash ic Size

Mobile phone software version for:23_V11

this is information of your mobile Firmware inside

C:\Users\reetesh\Desktop\LEATEK52_6432_10A_PCB01_GPRS_MT6252_S01.23_V11.BIN, size: 8 M.

This is path of saved readed flash file "

=======================================================================================

3.WRITE FLASH

Write flash useful when you got dead phone for flash or when you got any problem in other operation and your phone make problem then you can write flash file

for getting reworking phone

-----------------------------------------------------------------------

How can i use write flash function?

Click on write flash,

Click on Auto Detect Pinout,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Press and hold power button of phone,

Click on Run button,

When it ask for flash file location then select right flash file for flashing

It will show you like this:-

----------------------------------------------------------------------------------------------

Detection initiated, connect the phone and power on it...

Vcc: null

Gnd: 20

Analyzing Rx and Tx...

MT6250/6252, RX: 22, TX: 21

Setting...

Pinouts setting complete!

File versiLEATEK52_6432_10A_PCB01_GPRS_MT6252_S01.23_V11.BIN

Searching for passwords...

Could not find any potential passwords.

[Privacy Lock]812109

Connecting...

Hardware version:D000

Software version:0101

CPU TYPE:6252

Internal version:8B00

Boot downloading complete!

Flash ID: 00C20025

Flash Type: SF_MX25U6435E

Chip Capacity: 0x800000(8MB)

Mobile phone software version for:23_V11

Baud adjust...complete.

This detected file is not encrypted and it¡¯s safe to write data.

Flash erasing complete!

Flash writing complete.

>>Flash file C:\Users\reetesh\Desktop\gfive_w1_rashid.bin has been written.

----------------------------------------------------------------------------------------------

in this log as you can see :

CPU TYPE:6252

This is information of your cpu

Flash ID: 00C20025

This is information of your Flash id inside your mobile

Flash Type: SF_MX25U6435E

This is information of your Flash Type inside your mobile

Chip Capacity: 0x800000(8MB)

This is information of your Mobile Flash ic Size

Mobile phone software version for:23_V11

this is information of your mobile Firmware inside

4.FORMAT

Format : when you get faulty phone or dead the first you try with format option,

Some phone get problem in user data then phone is not working or making problem like slow work,

Ringtone not ringing , or phone restart on ringtone or restart after some time then using format option you can solve these problem

ps. after format problem not solved then you must need to flash phone

*Always performs read flash before format.

How can i use Format function ?

Click on Format,

Click on Auto Detect Pinout,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Press and hold power button of phone,

click on Run button,

when it ask for your confirmation press yes

when it ask for format address click on nv backup give path for save nv readed backup file then use auto format or safe format option

Click on backup NV

Give the path for save Nv backup

Click on auto

And press power on mobile

It will show you like this:-

Detection initiated, connect the phone and power on it...

Vcc: null

Gnd: 20

Analyzing Rx and Tx...

MT6250/6252, RX: 22, TX: 21

Setting...

Waiting for phone's response,please press Power on/off button.

Connecting...

Hardware version:D000

Software version:0101

CPU TYPE:6252

Internal version:8B00

Boot downloading complete!

Flash ID: 00C20025

Flash Type: SF_MX25U6435E

Chip Capacity: 0x800000(8MB)

Mobile phone software version for:23_V11

Baud adjust...complete.

User area backup completed!

Format range: Start Address: 0x758000,Format Length :0x0A8000

>>Flash erasing complete!

in this log as you can see :

CPU TYPE:6252

This is information of your cpu

Flash ID: 00C20025

This is information of your Flash id inside your mobile

Flash Type: SF_MX25U6435E

This is information of your Flash Type inside your mobile

Chip Capacity: 0x800000(8MB)

This is information of your Mobile Flash ic Size

Mobile phone software version for:23_V11

this is information of your mobile Firmware inside

Format range: Start Address: 0x758000,Format Length :0x0A8000

this is format address of your mobile

5. unlock code

some time mobile asking phone lock code in startup or in any function then you can read unlock code by using unlock code function.

How can i use Unlock code function?

Click on unlock code,

Click on Auto Detect Pinout,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Press and hold power button of phone,

click on Run button,

you get a windows then simple click start and wait for unlock code

code will be shown under lock-operation ..

It will show you like this

Detection initiated, connect the phone and power on it...

Vcc: null

Gnd: 20

Analyzing Rx and Tx...

MT6250/6252, RX: 22, TX: 21

Setting...

Pinouts setting complete!

Available Ports:COM4

Mobile Information:

Baseband chip Version:MT6252

DSP Firmware Version:2000.00.00

DSP Patch Version:1.0

Software Version:23_V11

Hardware Version:2233-REV.G

Audio Version:Melody V0.0

CPUID:00000700

UserCode:1234

IMEI1:135790246811220

>>IMEI2:135790246811220

in this log as you can see :

CPU TYPE:6252

This is information of your cpu

Flash ID: 00C20025

This is information of your Flash id inside your mobile

Flash Type: SF_MX25U6435E

This is information of your Flash Type inside your mobile

Chip Capacity: 0x800000(8MB)

This is information of your Mobile Flash ic Size

Mobile phone software version for:23_V11

this is information of your mobile Firmware inside

UserCode:1234

This is information of User code inside your mobile

IMEI1:135790246811220

This is First IMEI information of your Mobile

IMEI2:135790246811220

This is Second IMEI information of your Mobile Second IMEI

6.phone book

This function is used for extract phone book from mobile

First you need to read flash file for using this function.

How can i use phone book function?

Click on phone book,

click on Run button,

when it ask for flash file, select your readed flash file.

volcano spilt phone book from flash file and generate a txt file and asking for location where you want to save phonebook.txt

so give path for save phonebook and save it.

It will show you like this:-

The flash capacity is big and it may need a few minutes, please wait...

>>Find phonebook number altogether:3

in this log as you can see :

Find phonebook number altogether:3

This is information of contact number in txt file,

7.phone info

This is same as Read info

Phone info useful for read mobile information’s. This will tell you complete details of your phone such as Mobile Flash ic,

Mobile Cpu ( which MTK Cpu inside ), Mobile Flash size etc

----------------------------------------------------------------------------------------------------------------------------------------------------------

How can i use Phone info function?

Click on Phone info,

Click on Auto Detect Pin out,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Press and hold power button of phone,

click on Run button,

you will get a windows then simple click start and wait for full info of phone

It will show you like this

Mobile Information:

Baseband chip Version:MT6252

DSP Firmware Version:2000.00.00

DSP Patch Version:1.0

Software Version:23_V11

Hardware Version:2233-REV.G

Audio Version:Melody V0.0

CPUID:00000700

UserCode:1234

IMEI1:135790246811220

>>IMEI2:135790246811220

in this log as you can see :

CPU TYPE:6252

This is information of your cpu

Flash ID: 00C20025

This is information of your Flash id inside your mobile

Flash Type: SF_MX25U6435E

This is information of your Flash Type inside your mobile

Chip Capacity: 0x800000(8MB)

This is information of your Mobile Flash ic Size

Mobile phone software version for:23_V11

this is information of your mobile Firmware inside

UserCode:1234

This is information of User code inside your mobile

IMEI1:135790246811220

This is First IMEI information of your Mobile

IMEI2:135790246811220

This is Second IMEI information of your Mobile Second IMEI

8.Tools

IMPORTANT: - You must be performs read flash first for using this option .

This function has 4 other function inside it

How can i use Tools?

Click on Tools,

click on Run button,

In tool operation a windows will open with 4 other operation

They are :

1. Spreadtrum clear theft proof lock

2. Inquire MT format Address

3. MT-Repair BAD

4. Change IMEI in flash file

---------------------------------------------

1. spreadtrum clear theft proof lock :-

---------------------------------------------

This option is for remove antitheft lock from flash file

How can i use spreadtrum clear theft proof lock ?

Select readed flash file

Wait for some time, it's depend on size of flash file

A new file is saved on same location with disabled Antitheft function

now your file is with Antitheft disabled so you can flash it using write flash function

>>Theftproof Lock cleared,please write the previously backup file

----------------------------------------

2.Inquire MT format Address :-

----------------------------------------

This function is used for getting format address; This Address is used for manual formatting

How can i use Inquire MT format Address?

select readed flash file now you get your manual format address and cpu id

It will show you like this

Format range: Start Address: 0x758000,Format Length :0x0A8000

This is real format Address of this mobile

------------------------------

3.MT-Repair BAD :-

------------------------------

Mobile that showing Illegal Trail use can be repaired by using MT-Repair BAD function.

How can i use Inquire MT Repair BAD?

Read flash file first using Read flash function.(that already described on top of this file)

Locate readed flash file and press Illegal Software Button.

Put cupid (you can get cpu id by reading phone info )

Click on illegal software

It will generate a file save it and flash it

-----------------------------------

4.change IMEI in flash file:-

-----------------------------------

This function can be use for out IMEI direct in to flash file

If your phone making problem like. IMEI corrupt again and again so this function is for you .

With help of this function you can change IMEI in flash file (IMEI will be fixed)

How can i use Change IMEI in Flash file function?

First you need to read flash file from mobile (How to read flash? answer is already described in this file)

For some reasons, some phones need to change IMEI.

Please read the phone flash files first and then check phone IMEI number using *#06#.

Next, input it to "File IMEI", the next step is to type the IMEI-number-to-be in "Write IMEI".

Then, load the read-out-file to "Flash File" and click the "Change IMEI" button.

This function is not omnipotent, but for reference only.

A new flash file generated and saved in same location of source file.

Now you need to write new generated flash file using write flash function (how to write flash? answer is already described on this file)

9.clear nand

with the help of this function you can erase nand memory .

this function for those phone that have nand flash memory ..

you can identify flash type using read info or phone info function

How can i use Clear NAND?

Click on Clear NAND,

Click on Auto Detect Pin out,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Press and hold power button of phone,

click on Run button,

10.sp unlock

some mobile comes lock with default Operator, another Operator’s sim not working or asking for network unlock code .

with the help of this function you can unlock service provider (network unlock)

How can i use Sp-Unlock ?

Click on Sp-Unlock,

Click on Auto Detect Pin out,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Press and hold power button of phone,

Click on Run button,

It will show like .

Connecting...

Hardware version:D000

Software version:0101

CPU TYPE:6252

Connecting, please hold on the power key...

Can loosen the phone is switched on key

Start analysis flash internal data.

>>Unlock failed, did not find network lock data.

In this log. As you can see

Software version:0101

This is information of software version of this mobile.

CPU TYPE:6252

This is CPU ID of this mobile

>>Unlock failed, did not find network lock data

Ooops! My phone not had network lock so it’s showing error

11.touch screen

Some mobile have touch screen facility but they have damage touch or non working.

And phone stuck on touch screen calibration .. on this condition need to replace touch screen or bypass calibration ..

Sometime touch screen not available or not working properly so calibration not done then need to bypass .

using this function you can bypass touch screen calibration.

How to use touch screen function?.

Click on Touch screen,

Click on Auto Detect Pin out,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Press and hold power button of phone,

Click on Run button,

A new window will open.

Click on start

Then click Calibrate automatically when it's enabling

12. Barcode

How to use barcode function?

Click on barcode,

Click on Auto Detect Pin out,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Press and hold power button of phone,

Click on Run button,

A new window will open.

Click on start

Then click Barcode Decrypt when it's enabling

13. Phonebook

Using this function You can import or export your phone book

How to use Phonebook function?

Click on Phonebook,

Click on Auto Detect Pin out,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Press and hold power button of phone,

Click on Run button,

A new window will open.

Click on start

Now phone goes to tracker mode

Export or import mode enabled

If you want to save your phonebook to a file

Then click on Export phonebook

If you want to put phone book in mobile from saved file then click on Import phone book

14. General parameter

General Parameter is use for Take backup of your phone important data. like NVM ( Signals files ), Imei Data, Mobile Celebration data, and some other,

This is very useful when you got any new phone you must take General Parameter backup same like you do from read Flash.

This is help full if after format you got No signals or Imei Invalid

in Some mobile after format your can't repair imei

so you just write backup file after format

you will get your imei back

keep in mind this function will only work if mobile able to come in META MODE

means mobile can able to power on

Using this function You can import or export parameter of mobile

How to use General parameter function?

Click on General Para.

Click on Auto Detect Pin out,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Press and hold power button of phone,

Click on Run button,

A new window will open.

Click on start

Now phone goes to tracker mode

Export parameter or import parameter mode enabled

If you want to save your parameter to a file in pc

Then click on Export parameter

If you want to put parameter in mobile from saved file then click on Import parameter

15. Fix Signal

Using this function you can fix network signal of mobile

How to use Fix signal function?

Click on Fix signal.

Click on Auto Detect Pin out,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Press and hold power button of phone,

Click on Run button,

A new window will open.

Click on start

Then click fix signal when it's enabling

This function had 2 mode if mode 1^st not fix your problem then you can try on mode 2^nd

16.Analize code

This function can be used For getting all code from flash file .

How can i use Analyze code?

First read flash file using Read flash function

(how to read flash is already described on this file)

click on run and select readed flash file.

All code from flash file will be showing in log window

It will show you like this:-

Mobile Information:

Baseband chip Version:MT6252

DSP Firmware Version:2000.00.00

DSP Patch Version:1.0

Software Version:23_V11

Hardware Version:2233-REV.G

Audio Version:Melody V0.0

CPUID:00000700

UserCode:1234

IMEI1:135790246811220

IMEI2:135790246811220

Analyze UserCode:

>>1234;

in this log as you can see :

Software Version:23_V11

This is information of your Mobile software version

CPUID:00000700

This is information of your Mobile cpu id

UserCode:1234

This is information of your Mobile current usable user code

Analyze UserCode

2767

8752

1122

0000

5265

>>1234;

This is information of your Mobile user code

Now time to see hidden function like how to change IMEI

IMPORTANT NOTE :-

Changing IMEI is illegal in some country so please use it on your own risk Volcano team are not Responsible for any future Problem

*Always write IMEI same as comes with factory "factory IMEI always written in back of phone .

For enabling IMEI function you need to press ALT+CTRL+I from your keyboard

For enable click yes

For disable click no

1.Write IMEI

some phone showing "INVALID SIM CARD" then first check IMEI of phone using *#06# if IMEI showing like 1234567890.... or showing blank then need to reprogram IMEI

How can I use Change IMEI function?

Turn on mobile with sim

Insert usb to phone & select comport

Install proper driver

Click on IMEI change,

Unmark on Auto Detect Pin out,

Select Boot Auto,( Keep in mind for some phones you need to select different boot )

Mark on usb-mode

Click on Run button,

New IMEI tool windows will open

Select usb on comport

When it asks for IMEI then write IMEI and click on write button