Tuesday 19 June 2012

ATF superb nokia flasher


FLASH: Supporting new loaders for SL3 phones
FLASH: AFT is the first 3rd party BOX that supports RAPUYAMA NEW loaders with NEW Protocol (2010 loaders).
FLASH: AFT Supports dead USB flashing also for new loader models.
FLASH: Unbelievable Flashing Speeds:
- 6700c FULL FLASHING Using Fbus 28secs
- X3 FULL FLASHING Using Fbus 29secs
- E52 FULL Flash via FBUS = 49 Seconds
REPAIR: Repair Super dongle key of SL1,SL2, SL3
REPAIR: Repair Sim Lock Data of SL1,SL2
UNLOCK: Remove Simlock Via Codes of SL1,SL2
UNLOCK: Remove Simlock for so called "SL3" New RAPIDO versions of:
- 5800d (RM-356) - v31.0.008 - v30.0.011 - v31.0.101
- 6790s-1c (RM-492)
- 6790s-1b (RM-599)
- E63 (RM-437) - v400.21.013
- E71 (RM-346) - v400.21.013
- N96 (RM-247) - v30.033 - v30.101
TUNING & MAINTENANCE: Life Timer Tuning not only reset but you can write your desire life time(First In World)
TUNING & MAINTENANCE: Factory Reset, Warranty Edits, Production Data Edits
TUNING & MAINTENANCE: Camera Configuration Read/Write
IMEI & LOCKS:: Unlock Using Code Calculation so no more damages to phone warranty or certificates ( Supports SL1 SL2 & Some So called SL3 )
IMEI & LOCKS:: Unlock / Relock Using RPL Method
PM: Read Write Permanent Memory Using SX4 Server
PHONE TEST: Self Test Phone Features




Hardware:
480 mbps HIGH-SPEED USB 2.0 Connection (First In World) due this PC connection is 40 times faster than any other box in the market
100% FPGA based implementation of the flash bus protocols (First In World) so significantly faster and more stable than regular MCU based boxes
Adjustable VCCIO Logic Levels (3.30v, 2.80v and 1.80v) so:
- Compatible with old phone model Logic Level (3.30v)
- Compatible with new phone model Logic Level (2.80v)
- Compatible with future phone model Logic Level (1.80v)
Proper ESD protection on the FLASHBUS port so protects phone damage due to Electro Static Discharge
Ultra Fast Flash Clock currently upto 15 Mhz (First In World ) so firmware updatable to support upto 60 Mhz without the need of hardware modifications
Internal VPP Flash Voltage Generator (3.0v, 5.0v, 9.0v and 12.0v) so:
- Makes Flash Erasing on slow phones faster
- Does not require external power adapters to generate 9.0v and 12.0v
- Uses a Fast Switching SEPIC design
Hardware Upgradable using internal Expansion Slots
Micro-SD Card Slot for future developments
Dual RJ-4x Ports (RJ-45 and RJ-48) for External Communication so:
- The RJ-45 Port is the main "Turbo" Bus
- The RJ-48 Port is the Secondary Bus that can be made to support parallel or serial protocols such as 2Mbps UART, JTAG, and Flashing Protocols.
5 Multi Coloured LED Indicator Lights that shows:
- Rectangular Orange : FBUS_RX
- Rectangular Green : FBUS_TX
- Circular Blue : USB_POWER / ACP-X_POWER
- Circular Green : VBATT
- Circular Orange : VPP